Skip to main content

S0400 - "XL" Eyelet Pliers: Holes and eyelets from 6.5 up to 12.5 mm

WARNING: Optimal results can only be guaranteed when using our eyelets! 

Instruction manual

For perfect punching of eyelets with shaft diameters of 6.5 to 12.5 mm using strictly parallel guiding of the tool inserts. The tool inserts (not included with the basic pliers) are designed in such a way that the material can be pre-punched (safe perforations up to a material thickness of 2 mm) and the eyelets pressed in with the same tool.

These pliers make you mobile!

The eyelets can be worked on where they are needed: on site. Easily done by hand, without a hammer or machinery.

Many materials, such as tarpaulin, awning fabric, mesh and canvas, can be safely worked on with this portable hand-held tool. The large opening allows the eyelets to be affixed deep into the material (radius: 38 mm, opening: 11 mm)

Special features

Alongside work on eyelets, the pliers can also be used for customer-specific applications where a high pressing force and/or parallel-acting tool guidance are required. The tool-holding fixtures also allow the use of custom-made tools, such as the embossing, folding and punching of sheet metals and much more.

Tool inserts

The tools can be quite easily swapped and reordered. Please note: The desired tool inserts must be ordered separately.

No. Length/Size Version Weight
0400-0401 300 mm XL Eyelet Pliers without tool inserts 930 g
0400-1406 6.5 mm Tool insert 12 g
0400-1408 8.5 mm Tool insert 12 g
0400-1410 10 mm Tool insert 25 g
0400-1412 12.5 mm Tool insert 25 g
No. Type Size Weight
0400-0421 Base for XL Eyelet Pliers 285 x 80 mm 600 g